thinkpad executor done as well

_functions.sh

@@ -104,8 +104,8 @@ V_VA=55
 V_POWER_FACTOR=56
 
 function test_i2c_device {
-    if [ ! -d "/sys/bus/i2c/devices/i2c-${I2CBUS}/${I2CBUS}-00${2}" ]; then
-        echo "run ${3} 0x${2} > /sys/bus/i2c/devices/i2c-${I2CBUS}/new_device"
+    if [ ! -d "/sys/bus/i2c/devices/i2c-${I2CBUS}/${I2CBUS}-00${1}" ]; then
+        echo "run ${2} 0x${1} > /sys/bus/i2c/devices/i2c-${I2CBUS}/new_device"
         exit 2
     fi
 }
@@ -160,3 +160,8 @@ function mymqtt_update {
     mymqtt_test
     mosquitto_pub -t "${MQTT_TOPIC}/${1}/${2}/1/0/${3}" -m "${4}"
 }
+
+function mymqtt_battery {
+    mymqtt_test
+    mosquitto_pub -t "${MQTT_TOPIC}/${1}/${2}/3/0/0" -m "${3}"
+}

cambridge.sh

@@ -14,7 +14,7 @@ mymqtt_init "${ID}" "${TEM_ID}" "${S_TEMP}" "CBG TEMPERATURE"
 mymqtt_init "${ID}" "${HUM_ID}" "${S_HUM}" "CBG HUMIDITY"
 mymqtt_init "${ID}" "${BAR_ID}" "${S_BARO}" "CBG BAROMETER"
 mymqtt_init "${ID}" "${RAIN_ID}" "${S_RAIN}" "CBG RAIN"
-mymqtt_init "${ID}" "${SUN_ID}" "${S_CUSTOM}" "CBG SUN"
+#mymqtt_init "${ID}" "${SUN_ID}" "${S_CUSTOM}" "CBG SUN"
 
 while true; do
     cbg="$(wget -O- -q https://www.cl.cam.ac.uk/research/dtg/weather/current-obs.txt)"
@@ -48,7 +48,7 @@ while true; do
     mymqtt_update "${ID}" "${HUM_ID}" "${V_HUM}" "${data[humidity]}"
     mymqtt_update "${ID}" "${BAR_ID}" "${V_PRESSURE}" "${data[pressure]}"
     mymqtt_update "${ID}" "${RAIN_ID}" "${V_RAIN}" "${data[rain]}"
-    mymqtt_update "${ID}" "${SUN_ID}" "${V_VAR1}" "${data[sunshine]}"
+    #mymqtt_update "${ID}" "${SUN_ID}" "${V_VAR1}" "${data[sunshine]}"
 
     sleep "$INTERVAL"
 done

thinkpad.sh

@@ -2,22 +2,23 @@
 
 source /usr/local/lib/collectd/_functions.sh
 
-HOSTNAME="${COLLECTD_HOSTNAME:-$(hostname -f)}"
-INTERVAL="${COLLECTD_INTERVAL:-60}"
-DOMOTICZ_PORT="${2:-8080}"
-DOMOTICZ_IDX="${1:-1}"
-DOMOTICZ_URL="http://${HOSTNAME}:${DOMOTICZ_PORT}/json.htm?type=command&param=udevice"
+ID="90"
 
-IFS=';' read -ra KEYVALS <<< "${DOMOTICZ_IDX}"
-declare -A idx
-for item in "${KEYVALS[@]}"; do
-    idx[${item%=*}]=${item##*=}
-done
+POWER_ID="1"
+CURRENT_ID="2"
+VOLTAGE_ID="3"
+AC_ID="4"
+TEM_ID="5"
+
+mymqtt_init "${ID}" "${POWER_ID}" "${S_POWER}" "THINKPAD POWER"
+mymqtt_init "${ID}" "${CURRENT_ID}" "${S_MULTIMETER}" "THINKPAD CURRENT"
+mymqtt_init "${ID}" "${VOLTAGE_ID}" "${S_MULTIMETER}" "THINKPAD VOLTAGE"
+mymqtt_init "${ID}" "${AC_ID}" "${S_BINARY}" "THINKPAD AC"
+mymqtt_init "${ID}" "${TEM_ID}" "${S_TEMP}" "THINKPAD TEMPERATURE"
 
 while true; do
-
-    # battery
     ac="$(cat /sys/devices/platform/smapi/ac_connected)"
+
     for battery in /sys/devices/platform/smapi/BAT*; do
 
         if [ $(cat "${battery}/installed") -eq 0 ]; then
@@ -25,6 +26,9 @@ while true; do
         fi
 
         bname="$(basename $battery | tr '[:upper:]' '[:lower:]')"
+        ID=$(($ID+${bname/bat/}))
+
+
         prefix="thinkpad-${bname}"
         suffix=""
         declare -A data
@@ -39,48 +43,46 @@ while true; do
         data[current-current]=$(echo "scale=2;$(cat ${battery}/current_now)/1000" | bc)
 
         for key in "${!data[@]}"; do
-            value=${data[$key]}
-            echo "PUTVAL $HOSTNAME/${prefix}/${key}${suffix} interval=$INTERVAL N:${value}"
-
-            if [ ! ${idx[$key]+test} ]; then
-                continue
-            fi
-
-            sensor=${idx[$key]}
-            SEND="${DOMOTICZ_URL}&idx=${sensor}&battery=${data[percent-percent]}"
-            if grep -q "ac_connected" <<< "${key}"; then
-                svalue="ONLINE"
-                if [ "$value" == "0" ]; then
-                    value=4
-                    svalue="OFFLINE"
-                fi
-                SEND="${SEND}&nvalue=${value}&svalue=${svalue}"
-            else
-                SEND="${SEND}&nvalue=0&svalue=${value}"
-            fi
-            domoticz_send ${SEND}
-        done
-    done
-
-    # fan
-    prefix="thinkpad-fan"
-    suffix=""
-    declare -A data
-    status="$(cat /proc/acpi/ibm/fan)"
-    data[fanspeed-speed]=$(grep 'speed:' <<< "$status"  | awk '{print $2}')
-    data[gauge-fanlevel]=$(grep 'level:' <<< "$status"  | awk '{print $2}')
-    for key in "${!data[@]}"; do
-        value=${data[$key]}
             echo "PUTVAL $HOSTNAME/${prefix}/${key}${suffix} interval=$INTERVAL N:${data[$key]}"
-
-        if [ ! ${idx[$key]+test} ]; then
-            continue
-        fi
-
-        sensor=${idx[$key]}
-        SEND="${DOMOTICZ_URL}&idx=${sensor}&battery=${data[percent-percent]}&svalue=${value}"
-        domoticz_send ${SEND}
         done
 
+        mymqtt_update "${ID}" "${POWER_ID}" "${V_WATT}" "${data[power-power]}"
+        mymqtt_battery "${ID}" "${POWER_ID}" "${data[percent-percent]}"
+
+        mymqtt_update "${ID}" "${CURRENT_ID}" "${V_CURRENT}" "${data[current-current]}"
+        mymqtt_battery "${ID}" "${CURRENT_ID}" "${data[percent-percent]}"
+
+        mymqtt_update "${ID}" "${VOLTAGE_ID}" "${V_VOLTAGE}" "${data[voltage-voltage]}"
+        mymqtt_battery "${ID}" "${VOLTAGE_ID}" "${data[percent-percent]}"
+
+        mymqtt_update "${ID}" "${TEM_ID}" "${V_TEMP}" "${data[temperature-temperature]}"
+        mymqtt_battery "${ID}" "${TEM_ID}" "${data[percent-percent]}"
+
+        mymqtt_update "${ID}" "${AC_ID}" "${V_STATUS}" "${data[gauge-ac_connected]}"
+        mymqtt_battery "${ID}" "${AC_ID}" "${data[percent-percent]}"
+
+
+    done
+
+    ## fan
+    #prefix="thinkpad-fan"
+    #suffix=""
+    #declare -A data
+    #status="$(cat /proc/acpi/ibm/fan)"
+    #data[fanspeed-speed]=$(grep 'speed:' <<< "$status"  | awk '{print $2}')
+    #data[gauge-fanlevel]=$(grep 'level:' <<< "$status"  | awk '{print $2}')
+    #for key in "${!data[@]}"; do
+        #value=${data[$key]}
+        #echo "PUTVAL $HOSTNAME/${prefix}/${key}${suffix} interval=$INTERVAL N:${data[$key]}"
+
+        #if [ ! ${idx[$key]+test} ]; then
+            #continue
+        #fi
+
+        #sensor=${idx[$key]}
+        #SEND="${DOMOTICZ_URL}&idx=${sensor}&battery=${data[percent-percent]}&svalue=${value}"
+        #domoticz_send ${SEND}
+    #done
+
     sleep "$INTERVAL"
 done